This post may contains affiliate links which means I may receive a commission from purchases made through links. Learn more from affiliate policy page.
Are you looking to enhance your home’s security with Wifi Door Alarm System Wireless Diy? Yes, a WiFi door alarm system is a wireless DIY smart home security system that can be easily installed and monitored through a phone app.
I made the decision to install one after coming home one day to find my front door wide open.
Nothing was taken, but it was still so unsettling. I never wanted to feel that violation of my personal space again. After doing some research, I found that WiFi-connected door and window sensors were an affordable way to get alerts whenever an entry point is opened.
In this guide, I’ll explain the key features of wireless door alarms and provide tips to help you choose and install the right system for your smart home security needs.
You’ll learn how to set up the sensors, connect them to your WiFi, and customize alerts so you can get instant notifications right on your phone.
What is Wifi Door Alarm System Wireless Diy?
A WiFi door alarm system is a great way to enhance home security without the need for professional installation or paying monthly fees. These wireless systems are perfect for DIY smart home setups.
WiFi door alarms consist of compact, battery-powered sensors that mount on doors, windows, and other entry points in your home. The sensors connect to your existing wireless network to communicate with a central hub.
When a sensor detects movement, like a door being opened, it sends an instant alert to the hub. The hub then pushes a notification to your smartphone, so you know whenever an entry point has been breached.
Some WiFi door alarms even let you customize alerts for different kinds of events. For example, you can set up a special siren sound whenever your front door is opened versus a simpler notification for a window.
Key Features and Benefits Of Wifi Door Alarm System Wireless Diy
There are several great reasons to consider installing a DIY WiFi door alarm system:
- Wireless connectivity – No need to run wires. Sensors use WiFi and battery power for flexible, cable-free installation.
- Instant notifications – Get alerts on your phone immediately whenever a sensor is triggered.
- Remote access – Check system status and arm/disarm your system from anywhere.
- Easy DIY installation – The sensors mount with adhesive or screws, and connect to WiFi in minutes. No technician or complex wiring required.
- Smart integrations – Many systems integrate with other smart devices like lights, cameras, locks, etc.
- Affordable pricing – DIY WiFi systems cost much less than professionally installed and monitored systems.
- No monthly fees – You purchase the hardware outright with no recurring monthly costs.
WiFi door alarms provide an easy path to 24/7 home monitoring and peace of mind. As long as you have WiFi coverage, you can install security sensors in minutes.
Keep reading to learn more about the different types of WiFi door alarms, key features to look for when buying, and tips for easy DIY installation.
Types of WiFi Door Alarms
There are a few different types of WiFi-connected door and window alarm systems available. The right choice depends on your budget and how advanced you want your setup to be.
Basic Door/Window Sensors
The most affordable and straightforward option is a basic system consisting of individual door/window sensors.
These sensors are very simple – they just detect when a door or window is opened and send an alert. But they provide an excellent entry-level solution if you just want to monitor a few key entry points.
Basic WiFi door/window sensors are quick and easy to install. They consist of two parts – a sensor that mounts on the door or window with adhesive, and a small battery-powered magnet that mounts on the frame.
When the door or window is closed, the sensor and magnet are aligned. But when it opens, the magnet moves away, which the sensor detects and interprets as an “open” event.
This triggers the sensor to send a signal to the WiFi-connected hub. The hub then pushes an instant alert to your smartphone, so you know the entry point was breached.
Most app dashboards let you customize notifications – like choosing a unique sound for your front door versus a back window. Some systems also allow SMS or email alerts.
While very simple, these affordable WiFi sensors provide reliable open/close monitoring and alerts for just $20-50 per sensor. They are a great standalone option if you just need basic monitoring.
Advanced Smart Sensors
More advanced systems offer “smart sensors” with additional capabilities beyond simple open/close detection.
For example, you can get WiFi door sensors with built-in motion detectors. This allows them to send specialized motion alerts in addition to just open/close.
Smart sensors may also have other detectors like temperature, humidity, light, vibration, etc. This allows you to monitor environmental conditions and get alerts for potential issues.
Advanced sensors typically cost more, ranging from $40-100 each. But they provide more detailed monitoring and customizable alerts.
The added functionality also makes them better suited for automation and interaction with other smart home devices. For example, a motion-detecting door sensor could automatically turn on lights when someone enters a room.
DIY Alarm System Kits
For whole-home coverage, a DIY alarm system kit provides an all-in-one package with a variety of sensors for doors, windows, motion, environmental conditions, and more.
Kits include a central hub to connect all the sensors and push notifications to your phone. The hubs often have sounders built-in to act as a siren when an alarm is triggered.
Many kits use easy wireless sensors, making DIY installation simple – usually just peel-and-stick adhesive. No wiring required.
They provide an affordable way to monitor every entry point and room in your home. For example, you can put contact sensors on all doors/windows, motion detectors in key areas, smoke/CO detectors, water leak sensors, and more.
DIY kits provide professional-grade monitoring without monthly fees. Most cost $200-500 for the full package, depending on the number of sensors included.
Overall, advanced smart sensors and full DIY system kits provide more robust monitoring and automation options. But basic door/window sensors offer an easy and budget-friendly entry point for WiFi home security.
Advanced Smart Sensors
For more advanced home monitoring, WiFi smart sensors go beyond basic contact sensors to detect motion, temperature, humidity, light levels, vibration and more.
The added functionality allows you to get notified of different event types and environmental conditions throughout your home, not just open doors and windows.
Advanced smart sensors cost more, typically ranging from $40-100 per sensor. But they bring some key benefits:
Motion detection – Door/window sensors with built-in motion detectors can send alerts when movement is detected in a room, in addition to tracking open/closed status. You’ll know when someone enters the room, not just when the door opens.
Environmental monitoring – Sensors with temperature, humidity, light level detectors allow you to monitor conditions in different rooms. You can get alerts for unusual activity, like temperature spikes in a server room or freezer.
Vibration monitoring – Vibration detectors can pick up activity like slamming doors or even glass breaking. They provide more physical security than just open/close sensors.
Light triggering – Light level sensors allow smart lighting automation. Lights can turn on automatically when you enter a room or when it gets dark outside.
Customized notifications – With different event types available, you can set up specific alert sounds, texts, or emails for different sensor triggers like motion, vibration, temperature, etc.
Smart integrations – Advanced sensors allow for more robust automations with other smart home devices. For example, when a motion sensor in a hallway is triggered, it can signal lights and thermostats in adjacent rooms to turn on and adjust temperature.
Flexible placement – With a variety of sensor types, you can monitor and get alerts from more areas around your home, not just entry doors. Motion detectors in hallways, temperature sensors on freezers, vibration detectors on walls/windows, etc.
Security cam triggers – Integrations with security cameras allow advanced sensors to trigger recording or live viewing on your cameras when certain events occur. For instance, motion at your front door can start a live camera feed.
Customized tracking – Monitor conditions specific to certain rooms, like humidity levels in an art studio or wine cellar, temperature maintenance in a lizard habitat, etc.
Advanced smart sensors provide more detailed insights into activity across your entire home with more flexibility for intelligent notifications, automation, and camera integration.
DIY Alarm System Kits
For whole-home security, complete DIY alarm system kits provide an all-in-one package with a variety of sensors to cover every room and entry point.
Kits include the following components:
- Hub – The central controller that connects to WiFi and communicates with all the sensors. It sends instant alerts to your phone when sensors are triggered. Hubs often have built-in sounders to act as a siren.
- Door/Window sensors – Contact sensors for all your exterior doors and ground floor windows to detect when they are opened.
- Motion detectors – Motion sensors for key rooms to detect movement and intruders.
- Environmental sensors – Smoke, carbon monoxide, temperature, water leak and other detectors to monitor hazards.
- Keypads – Wall-mounted, numeric-code keypads that allow you to arm and disarm the system.
- Remote controls – Portable keychain-sized remotes for arming/disarming on the go.
- Cameras – Some kits include indoor cameras, like video doorbells, for visual monitoring.
- Smart home integrations – Connectivity with lighting, smart locks, thermostats and other devices for automation.
DIY kits simplify home security by packing all these components into a single bundle. Rather than piecing together individual sensors, you get everything you need in one purchase.
Kits use wireless components for flexible placement without wiring or professional installation. The components just stick on walls and windows with adhesive or mount with screws.
You can easily install a full system yourself in an afternoon. All the devices connect wirelessly to the hub, which links to your WiFi router.
The hub provides a central dashboard to configure monitoring settings, customized notifications, automation rules, and remote access from your smartphone.
DIY kits provide complete professional-grade home protection for much less than traditional monitored systems. Most kits cost around $200-500 depending on the number of sensors and components included.
And they often have no recurring fees – you own the hardware outright. There are typically options for professional monitoring services if you want, but they aren’t required.
Overall, DIY alarm system kits simplify the process of outfitting your entire home with security sensors and equipment. They make robust home protection achievable without wiring or monthly costs.
Key Benefits of WiFi Door Alarms
WiFi-enabled door and window alarm systems provide a number of great benefits compared to traditional wired security systems:
Wireless for Flexible Installation
WiFi systems don’t require any wiring between sensors and the central hub. Sensors typically run on battery power and communicate wirelessly.
This allows for very flexible placement of sensors on doors, windows, and anywhere else you want protection. No need to run wires through walls and floors.
Wireless also makes DIY installation simple. You can easily mount the self-adhesive sensors in any location without needing to tap into your home’s wiring.
Real-Time Notifications
Whenever a sensor is triggered, it communicates wirelessly with the WiFi-connected hub which instantly pushes a notification to your phone.
You get real-time alerts on breach attempts rather than needing to check a security panel. This allows you to respond immediately to issues as they occur.
Many systems allow you to customize notifications with different sounds, texts, or emails depending on the sensor. Unique alerts can signify priority issues.
Remote Access via Smartphone
With the system connected to your home WiFi and app on your smartphone, you can remotely arm, disarm, and monitor your system from anywhere.
Check system status, receive notifications, view live camera feeds, and control smart home integrations whether you’re at work, on vacation, or out running errands.
DIY Installation
DIY WiFi systems don’t require professional installation. The sensors mount using peel-and-stick adhesives or screw holes, and wirelessly connect to the hub.
You can easily install a full system yourself in an afternoon. This saves significant money compared to pro install costs.
DIY also makes it easy to add new sensors later if you move or want increased coverage. Just mount and connect the new sensors wirelessly.
Integration with Other Smart Devices
Many WiFi alarm systems integrate with smart lights, thermostats, locks, cameras, and other devices in your home.
You can build automated actions like flashing lights when a sensor is triggered, or locking doors and turning up temperature when the alarm is armed away.
Home automation takes your DIY security to the next level. WiFi connectivity enables endless integration possibilities.
Overall, wireless connectivity, smartphone access, easy DIY setup, and smart home integration make WiFi door alarms flexible, convenient, and powerful home security solutions.
What to Look for When Buying
When shopping for a DIY WiFi door and window alarm system, here are some key factors to consider:
Wireless Range and Connectivity
Look for sensors with reliable wireless connectivity to the hub across your desired range. Longer range allows for flexible sensor placement.
Bluetooth tops out around 30 feet while WiFi can reach 100+ feet. Cellular-connected systems have unlimited range but cost more.
The hub should connect to your WiFi router with a strong signal. Centrally locate the hub for best connectivity.
Battery Life
Sensors will run on replaceable coin cell batteries lasting 6 months to 5 years depending on use. The longer the better to reduce maintenance.
Motion sensors will drain faster than contact sensors. Look for long 3-5 year battery life for most use cases.
Detection Performance
Sensors should reliably detect door/window openings and motion with minimal false alarms. Independent testing reviews can verify performance.
Look for crisp open/close detection and adjustable motion sensor range and sensitivity settings.
Smart Integrations
If you want home automation, look for a system with support for third-party integrations like IFTTT or direct compatibility with smart lights, locks, etc.
WiFi systems typically offer more integration options than cheaper Bluetooth options.
Ease of Setup and Use
Look for a clear app-guided or web-based setup process that doesn’t require any hardwiring or professional installation.
The app and web interface should be intuitive for monitoring, customizing alerts and rules, adding new sensors, etc.
Expandability
Consider how many sensors are supported and if you can easily add more later for full-home coverage.
Also look for a range of sensor types like motion, temperature, vibration to meet future needs.
Additional factors to consider include cost, design aesthetics, customer support quality, and data security protocols. Take the time to thoroughly evaluate systems against your specific needs and home layout.
Installing Your WiFi Door Alarm
Installing a DIY WiFi door and window alarm is a straight-forward process that you can tackle yourself in just a few hours. Here are some tips for smooth installation and setup:
Tips for Placing Sensors
- Mount contact sensors on all exterior doors and ground floor windows for entry monitoring. Place towards tops of doors/windows for best detection.
- Put motion sensors in any areas out of direct sight lines from doors, like hallways, stairs, and corridors. Avoid pointing directly at windows or doors to prevent false alarms.
- Make sure the hub is centrally located in your home for optimal WiFi connectivity to all sensors.
Step-by-Step Installation
- Download the system’s app and create an account for access.
- Mount the hub centrally in your home near a power outlet and your WiFi router.
- Mount the sensors on doors, windows, and other locations using the provided adhesive strips or screws.
- Install batteries in each sensor.
- Open the app and follow the prompts to connect each sensor to the hub one at a time as they are installed.
- Name/label each sensor in the app during connection for easy identification.
- Check that each sensor triggers a real-time push notification when activated. Adjust placement as needed.
- Connect the hub to your WiFi network using the app setup wizard.
- Customize notifications, automation rules, and remote access settings in the app.
Connecting Sensors to WiFi
- Battery-powered sensors connect wirelessly to the hub using radio protocols like Z-Wave, ZigBee, or proprietary designs.
- The hub bridges the proprietary sensor network to your home WiFi for app connectivity.
- Sensors should automatically connect to the hub when installed nearby. Follow the app prompts to add each sensor to the system.
Accessing Alerts by Mobile App
- Receive real-time push notifications from the system’s iOS/Android app whenever a sensor is triggered.
- Customize notifications with unique sounds, texts, emails for different sensor events.
- View live status of all sensors, arm/disarm the system, and manage settings remotely from your smartphone.
With the app setup wizard and included guide, installing a DIY WiFi alarm system is straightforward. Take the time to place components thoughtfully, and you’ll reap the benefits of enhanced home security.
Automating Your WiFi Alarm System
One of the key advantages of WiFi-connected home security systems is the ability to automate various actions based on sensor activity. Here are some ways to take advantage of automation capabilities:
Setting Up Scenes and Automations
Many WiFi alarm apps have sections where you can configure scenes and automations without needing external services.
For example, you can create a scene called “Arriving Home” that turns on front porch lights and unlocks the smart lock when you open the front door. Or an “Away Mode” scene that arms the system and locks doors when you leave.
Integrations with Lights, Cameras, Locks
Many alarm systems integrate directly with popular smart home brands like Philips Hue, Nest, Ring, August, and more.
You can easily link light, camera, and lock devices to automatically activate based on sensor triggers.
For instance, motion in the hallway at night could turn on Hue lights and trigger Ring cameras to record. Or an exterior door opening while armed could flash Hue lights as a warning.
Customizing Alerts and Notifications
Beyond automations, you can customize monitoring alerts for different system events.
Configure unique sounds, SMS texts, and email alerts based on which sensor is triggered like entry doors, motion detectors, smoke alarms, etc.
Using IFTTT for Advanced Automation
The IFTTT web service allows creating custom applets that connect alarm systems to other IFTTT-compatible smart devices and web services.
You can build very advanced automations like flashing all Hue lights red and sending an SMS alert if your smoke detector activates. Or posting a warning on Facebook if an entry sensor is triggered while you’re away.
IFTTT provides nearly endless possibilities for connectivity that goes beyond just lights, locks, and cameras.
Leverage your WiFi alarm system’s automation and IFTTT capabilities to build custom routines that enhance security, provide intelligent notifications, and automate your smart home.
Security Considerations
While WiFi alarm systems provide many benefits over wired options, there are some security considerations to keep in mind:
Encryption Protocols for Wireless Security
Since components communicate wirelessly, strong encryption is essential to prevent hacking of sensitive data. Systems should use encryption standards like AES 128-bit or higher for sensor-hub communication.
Data transmitted to the cloud and phone apps should use TLS 1.2 or greater. Check published specs before buying.
Data Privacy and Storage
Review the brand’s published privacy policy to understand how your home data is stored and used. Reputable brands only store minimum data needed for functionality and provide options to delete data or opt-out of storage entirely.
Locally stored data is more secure than cloud storage which can be hacked. But it doesn’t allow remote access. Weigh the trade-offs for your needs.
Power Outage Protection
Sensors and hubs should have backup battery power so the system continues operating during power failures. This prevents security lapses if the power goes out.
Backup battery duration ranges from 8 hours to 24 hours or more. Longer is better for peace of mind during prolonged outages.
Regular Testing
Test your system components frequently to verify they are working properly and providing accurate notifications.
Walk test every sensor by triggering it and checking for alert notifications. Fix any placement or connectivity issues immediately.
Professional Monitoring
For ultimate protection, add professional monitoring so trained operators can dispatch emergency responders if an alarm sounds when you can’t respond.
Monitored systems have regular automated testing to verify functioning. But monitoring fees apply.
Insurance Discounts
Many insurance providers offer 5% to 20% discounts on homeowner’s insurance for a professionally monitored security system. This can offset part of the monitoring costs.
System Maintenance
Replace batteries every 1-5 years per manufacturer recommendations. Check that sensors are firmly mounted and evaluate connectivity issues immediately.
Keep the hub firmware updated via the app to ensure optimal performance and take advantage of new features and fixes.
Evaluate your home’s unique security needs and your comfort with DIY maintenance to determine the right system and features for protecting your space. Proper installation combined with periodic testing and maintenance will provide lasting security.
Top WiFi Door Alarms on the Market
If you’re looking for the best WiFi door and window alarms available, here are some top systems to consider based on expert reviews and customer experiences:
Reviews and Comparisons
Services like SafeWise, The Spruce, and Security.org thoroughly test and evaluate DIY WiFi alarm systems across criteria like detection accuracy, ease of use, smart integrations, and more. They provide in-depth professional reviews.
CNet, PCMag, and Digital Trends also offer technology-focused perspective on features and performance.
Checking Amazon reviews can give you customer feedback on real-world installation and use. Sort by most recent for the latest systems.
Budget vs. Advanced Systems
For a basic affordable system, Kangaroo and SimpliSafe offer starter kits with a hub and a couple door/window sensors for around $100-150. Or get individual sensors for under $20 each.
For advanced systems with more robust components and integrations, Ring Alarm, Abode, and Nest Secure cost $200-400 for multi-sensor kits.
Professional monitoring service adds $10-30 per month but provides more security and often discounts on homeowners insurance.
Top Picks for Easy Installation
Based on reviews, Ring Alarm, Kangaroo, and SimpliSafe consistently rate as top choices for easy DIY installation.
Ring and Kangaroo use all battery-powered components that stick on with adhesives. No hardwiring required.
Abode offers flexible wireless or wired sensors to suit your needs. Reviews praise their detailed app-based guidance for installation.
No matter which system you choose, look for wireless components, intuitive app-based setup instructions, and strong user reviews confirming it’s easy to install without any technical expertise required.
Spend some time reading professional reviews and real customer experiences to determine the right balance of features, price, and simplicity for your needs. The top WiFi systems provide robust functionality without requiring professional installation.
Frequently Asked Questions
Are Wifi Door Locks Safe?
WiFi enabled smart locks can be safe if proper security protocols are followed. Ensure the lock uses advanced encryption like AES-256 when communicating and transmitting data.
The lock company should have rigorous data security and privacy policies. Do research before selecting a brand. WiFi connectivity can provide more security, such as alerts when someone tries tampering with the lock. But controlling physical access to the lock is still important.
How Do Wireless Door Sensors Work?
Wireless door/window sensors consist of two components – a sensor that attaches to the door or window frame, and a magnet that attaches to the moving door itself. When the door or window is closed, the sensor and magnet are aligned closely.
But when the entrypoint is opened, the magnet moves away from the sensor, disrupting the magnetic field. This triggers the sensor to transmit a signal indicating the door/window has opened.
The sensor communicates wirelessly with a central hub, which then sends instant notifications to your phone. Some sensors also have accelerometers to detect vibration.
Is DIY Home Security Worth It?
DIY wireless home security systems can provide significant benefits over traditional wired systems. You avoid high installation costs, get flexible wireless sensors, access from your phone anywhere, and integrate with other smart devices.
DIY systems cost much less than pro installs, offer modern features like motion sensors and video doorbells, and allow you to self-monitor activity easily from an app.
With DIY, you own the equipment so there are no recurring fees. But you lose the active monitoring services of a traditional setup.
Overall, DIY systems provide affordable, flexible security for tech-savvy homeowners comfortable managing their own system.
Can You Convert a Wired Security System To Wireless?
It is possible to convert an older wired security system to wireless, but it requires upgrading your wired sensors, control panel, and other peripherals to new wireless versions.
This can get expensive having to replace most components. It may be more cost effective to install a separate DIY wireless system like Ring, SimpliSafe or Abode which don’t require any wired connections.
You could disable and remove the old wired system eventually. The wireless sensors for these new systems stick on surfaces with adhesives or screw holes, connecting wirelessly to a main control hub. This provides an easy path to wireless without rewiring your home.
How Long Does a Door Sensor Last?
Wireless door and window sensors are powered by replaceable coin cell batteries that last anywhere from 1 to 5 years before needing to be changed. Factors affecting battery life include:
- Battery mAh rating – higher values last longer. Common ratings are 110mAh to 1Ah.
- Sensor type – simple contact sensors last longest. Motion andenvironmental sensors drain faster.
- Frequency of triggering – doors/windows that are opened more often or vibration will drain the battery faster.
- Quality of battery – choose name brand lithium batteries for longest life.
Most sensors alert you when the battery is low so it can be replaced before dying completely. Following manufacturer guidance on battery type and changing them every 1-2 years provides the longest lifetime.
Do Wireless Doorbells Work Without WiFi?
Some wireless video doorbells rely on WiFi connectivity to stream live video feeds and send alerts to your phone. However, more basic wireless doorbells do not require WiFi.
These systems consist of a wireless doorbell button that communicates via radio frequencies like 900 MHz directly with a plug-in chime unit up to 300 feet away. When someone presses the button, the chime sounds to alert you.
No WiFi needed. This is useful if you don’t have WiFi coverage at your door, or just want a simple alert chime without needing to interact with your phone. But they lack video viewing or recordings.
Is There a Security System That Tells You When a Door Opens?
Yes, wireless DIY home security systems use door and window contact sensors that will notify your phone whenever an entry point is opened.
The sensors consist of two pieces – one attaches to the door frame, the other to the moving door. When the door is opened, the sensor transmits a signal to the system hub indicating the door has opened.
The system will push an instant alert to your phone app, allowing you to monitor door activity in real time from anywhere. Systems from Ring, SimpliSafe, Abode, and others support this capability.
How Long Does a Door Sensor Last?
The battery life for most wireless door sensors ranges from 1 to 5 years before needing to be replaced. Factors affecting life include battery capacity, frequency of triggering, sensor types, and battery brand.
Infrequently used doors with name brand 1100 – 2500 mAh batteries can last 5+ years.
Frequently used doors with cheaper batteries may only last 1-2 years. Most sensors alert you when the battery is low.
Following manufacturer guidance for battery types and changing them regularly every couple years ensures your sensors keep working 24/7.
Conclusion
Looking to enhance home security with a DIY WiFi door alarm system? This guide covered the key benefits of wireless sensors for real-time notifications, flexible installation, smartphone access, and integration with other smart devices.
Remember to choose a system with reliable connectivity, long battery life, versatile detection sensors, and user-friendly app controls. Installation is straightforward by adhering sensors on doors and windows.
With customizable alerts and automation options, WiFi door alarms provide modern protection without professional installation or monthly fees.
Give your home peace of mind by implementing a wireless system tailored to your unique needs today.
